Zhenda Farm in Gangnan District, Guigang City1.92MW Distributed Photovoltaic Power Generation Project Engineering
Zhenda Farm is located in Gangnan District, Guigang City, Guangxi. To reduce electricity costs and achieve a clean energy transformation, a project was carried out on the farm's rooftop to constructa 1.92MW distributed photovoltaic system. The project needs to step up the 0.4kV voltage output from the photovoltaic inverter to 10kV for grid connection. It requires that the grid - connected equipment occupies less space, can be constructed quickly, adapts to the high - temperature and high - humidity environment of the farm, and meets the grid's safety grid - connection standards.
Applied products
Photovoltaic grid - connected cabinet box - type substation(Customized products according to customer needs)
Siwu Solution
Customer Value
1. Tight land resources:
The production areas of the farm are densely packed. Traditional substations require independent civil construction, which takes up production space.
4. Tight construction period:
It is necessary to install quickly during the gaps in aquaculture operations to reduce losses caused by production suspension.
1. Save investment and space
Eliminate the secondary equipment cabin, reduce the civil construction area, and directly lower the construction cost.
Compact design, suitable for the narrow space around the roof of the farm.
2.No compromise on grid - connected safety
A vacuum circuit breaker is used on the high - voltage side (optionalType ZN28);
An intelligent reactive power compensation device is configured on the low - voltage side to avoid grid fines.
3. Exclusive adaptation for aquaculture scenarios
Shell temperature rise control≤40K (National standard GB/T17467), ensuring continuous operation at an ambient temperature of 35℃;Dustproof and moisture - proof design passedThe damp - heat test of GB/T20645 - 2006.
4. Efficient operation and maintenance throughout the whole cycle
Low - voltage outgoing lines can reach30 circuits, with reserved expansion interfaces for aquaculture equipment;
2.High requirements for grid - connection reliability:
The grid - connection point needs to have rapid fault detection andThe "four remote" functions to ensure the safety of the power grid.
3. Poor environmental adaptability:
There is a risk of ammonia corrosion around the farm, and the protection level of ordinary box - type substations is insufficient.
3、Intelligent grid - connected management
The high - voltage ring - network cabinet is pre - installed with an FTU terminal, which supports short - circuit/single - phase ground fault detection and has the “four - remote” functions of remote measurement, remote signaling, remote control, and remote adjustment, meeting the requirements of power grid dispatching.
4、Modular rapid deployment
After the whole station is pre - installed and debugged in the factory and hoisted into position on siteEfficientlyComplete grid connection.
1. Trinitarian integrated structure
− High-voltage switch+ Transformer + Low-voltage equipment integrated design, reducing independent prefabricated cabins and civil construction of cable trenches, and lowering the foundation cost.
2. Special protection for the breeding environment
− Adopt304 stainless steel shell (optional material), achieving IP54 protection through a honeycomb double-layer structure to resist high temperature, high humidity, and slightly corrosive gases.
|
|