Rated voltage is the maximum voltage limit of the system in which the switchgear is located. Standard values include 3.6kV, 7.2kV, 12kV, 24kV, and 40.5kV. In practical applications, the 6kV, 10kV, 35kV, 110kV, and 220kV values commonly referred to are the nominal voltage of the system, not the rated voltage of the equipment. When selecting high-voltage switchgear, it is essential to ensure that its rated voltage matches the voltage of the system. For example, in a 12kV system, a high-voltage switchgear with a rated voltage of 12kV should be selected. If the rated voltage is too low, the switchgear may not be able to withstand the system voltage, easily leading to equipment failure or even safety accidents; if the rated voltage is too high, it will result in wasted resources and unnecessary increased costs.
Two crucial indicators for assessing the insulation level of switchgear are the rated short-time power frequency withstand voltage (1 min) and the rated lightning impulse withstand voltage. Good insulation performance is key to ensuring the safe operation of high-voltage switchgear. When the insulation level is substandard, problems such as partial discharge or excessive circuit resistance may occur, leading to serious consequences such as equipment burnout. Different operating environments and voltage levels require different insulation levels. For example, in some humid and dusty industrial areas, switchgear with higher insulation levels is necessary. Relevant standards such as GB 3906-2006 "3.6kV~40.5kV AC Metal-Enclosed Switchgear and Controlgear" and GB/T 11022-2011 "Common Technical Requirements for High-Voltage Switchgear and Controlgear Standards" clearly stipulate the insulation level requirements. Taking a 12kV solid-insulated switchgear as an example, DL/T 404-2014 "3.6kV~40.5kV AC metal-enclosed switchgear" stipulates that its factory discharge rate is ≤10pC and its operating discharge rate is ≤20pC.
Short-circuit breaking capacity refers to the ability of a high-voltage switchgear to safely and reliably interrupt the short-circuit current when a short-circuit fault occurs. This is a crucial parameter because short-circuit faults are a common and highly dangerous type of fault in power systems. If the short-circuit breaking capacity of the switchgear is insufficient, it will be unable to interrupt the current in time when a short circuit occurs, leading to equipment damage and even serious consequences such as large-scale power outages. For example, in some large industrial plants, due to the large number of electrical devices, the short-circuit current may be large, requiring the selection of high-voltage switchgear with a strong short-circuit breaking capacity. Generally speaking, the higher the rated short-circuit breaking current, the stronger the short-circuit breaking capacity of the switchgear. Common rated short-circuit breaking currents include 25kA and 31.5kA.
Rated current refers to the current value that a high-voltage switchgear can withstand during long-term normal operation. Choosing the appropriate rated current is crucial for ensuring the normal operation and lifespan of the switchgear. If the rated current is too low, the switchgear may overheat due to overload during long-term operation, accelerating equipment aging and even causing malfunctions; if the rated current is too high, it will increase equipment costs. When determining the rated current, the actual electrical load needs to be considered. For example, a small factory with relatively few electrical devices and a small load can choose a switchgear with a lower rated current; while a large commercial center or industrial park with a large electrical load requires a switchgear with a higher rated current. Common rated currents include 630A and 1250A.
Loop resistance is a crucial parameter in high-voltage switchgear, reflecting the resistance value of the conductive circuits within the switchgear. Excessive loop resistance leads to excessive heat generation during current flow, consuming significant electrical energy, accelerating equipment aging, and reducing its lifespan. GB 3906-2020, "3.6kV~40.5kV AC Metal-Enclosed Switchgear," requires a loop resistance ≤100μΩ for 12kV models. When selecting high-voltage switchgear, products meeting the standard requirements for loop resistance should be chosen. Regularly testing the loop resistance allows for the timely detection of problems such as poor contact in the conductive circuits within the switchgear, facilitating timely maintenance and repair.
The protection rating indicates the ability of the high-voltage switchgear enclosure to protect personnel and equipment, usually represented by an IP code. The first digit indicates the dustproof rating, and the second digit indicates the waterproof rating. For example, IP30 means it can prevent the ingress of solid foreign objects larger than 2.5mm in diameter, but has no protection against water intrusion; IP54 means it can prevent dust from entering to a level that would affect the normal operation of the equipment, and can prevent water splashing. The requirements for the protection rating vary depending on the operating environment. In outdoor or humid, dusty environments, switchgear with a higher protection rating is required to ensure the safe operation of the equipment. In relatively clean and dry indoor environments, switchgear with a relatively lower protection rating can be selected.
In summary, when selecting high-voltage switchgear, it is necessary to comprehensively consider core parameters such as rated voltage, rated insulation level, short-circuit breaking capacity, rated current, loop resistance, and protection level. Only by selecting high-voltage switchgear whose parameters meet actual needs can the safe and stable operation of the power system be ensured, providing users with a reliable power supply. Furthermore, during operation, regular inspection and maintenance of the high-voltage switchgear are required to promptly identify and address potential problems, extending the equipment's service life.
|
|