In the heart of a city, land resources are extremely scarce, and every inch of space is fully utilized. With urban development and ever-increasing electricity demand, the need for power capacity expansion and upgrades is becoming increasingly urgent. However, substations in central areas often have very limited space due to early construction and planning restrictions, posing a significant challenge to power capacity expansion and upgrades. Solving this problem is not only crucial for the stability of the city's power supply but also of great importance to the city's sustainable development. This article will explore feasible solutions for substations in urban centers with limited space.
A detailed measurement and assessment of the civil engineering conditions, including the space dimensions, ventilation and heat dissipation capacity, and load-bearing structure of the power distribution room, is conducted. The models, service lives, and wiring methods of existing equipment, as well as whether the specifications of high- and low-voltage distribution cabinets and cables match the capacity expansion requirements, are understood. Simultaneously, external conditions are examined, such as whether the high-voltage incoming capacity of the upstream power supply is sufficient, the feasibility of adding new cable routes in the outgoing corridor, and environmental requirements, such as noise and oil pollution control. For example, in a capacity expansion and renovation project of an old power distribution room in a city center, on-site investigation revealed that the room was cramped, had poor ventilation, and its load-bearing structure could not support the weight of a large-capacity transformer. This provided crucial information for the subsequent renovation plan.
Analyze the total power, load rate, and peak/off-peak load curves of existing electrical equipment. Data can be obtained from electricity meters or monitoring systems to assess the actual load rate of existing transformers. If the load consistently exceeds 80%, capacity expansion is necessary; if it's below 30%, there may be an issue of overcapacity, and optimization should be implemented first. For example, in the power distribution room of a commercial center, analysis of electricity demand revealed that the load is high during peak hours and low during off-peak hours, resulting in significant fluctuations in transformer load rate. This load characteristic needs to be fully considered during capacity expansion and upgrades.
In situations with limited space, selecting compact electrical equipment that is small in size and high in performance is crucial. This includes using compact transformers and switchgear. Some new transformers employ advanced designs and materials, significantly reducing their size while maintaining capacity. Many compact switchgear options are also available, allowing for greater functionality within limited space. For instance, in a substation renovation project in a city center, compact 10kV switchgear was chosen, saving nearly one-third of the space compared to traditional switchgear.
Optimize equipment layout to improve space utilization. Double- or multi-layer arrangements can be used, installing equipment with different functions on different levels. For example, transformers can be installed on the bottom layer, and switchgear on the top layer. At the same time, pay attention to the safe distance between equipment to avoid mutual interference and impact. The layout should also consider the ease of operation and maintenance, ensuring that staff can easily perform inspections and adjustments. For instance, in the capacity expansion and renovation of a small power distribution room, optimizing the equipment layout and centralizing previously scattered equipment not only saved space but also improved operational convenience.
Smart grid technology enables real-time monitoring and control of power systems, improving the reliability and efficiency of power supply. By installing smart meters, sensors, and other devices, real-time power data can be acquired, allowing for precise analysis and management of electricity consumption. For example, smart meters accurately record users' electricity consumption time and volume, providing power companies with detailed information for rational power allocation. Simultaneously, smart grid technology also enables remote control and fault early warning, allowing for the timely detection and resolution of problems in the power system.
A prefabricated substation is a prefabricated unit that combines high-voltage switchgear, transformers, and low-voltage switchgear. It offers advantages such as compact structure, easy installation, and small footprint. In urban centers, prefabricated substations can replace traditional distribution rooms for power capacity expansion. Prefabricated substations can be manufactured in a factory and then transported to the site for installation, significantly shortening the construction period. For example, a commercial area in a city center underwent power capacity expansion using a prefabricated substation, which not only saved space but also completed the upgrade in a short time, restoring power supply.
The existing power distribution room will be dismantled to make room for new equipment installation. This includes removing damaged or unused switchgear and cable trays. Safety precautions must be taken during dismantling to avoid damaging other equipment. All dismantled equipment and materials will be properly disposed of; recyclable materials will be recycled, and non-recyclable materials will be treated according to environmental regulations.
If the existing space in the distribution room is insufficient to meet the capacity expansion requirements, appropriate civil engineering modifications can be considered. For example, the distribution room can be expanded to increase its area; or its structure can be reinforced to support the weight of larger capacity equipment. When undertaking civil engineering modifications, the impact on the surrounding environment and existing buildings must be fully considered to ensure the safety and feasibility of the project. For instance, a power distribution room capacity expansion project in a city center expanded the existing distribution room, creating space for the installation of new equipment.
Establish and improve the management system for the power distribution room, clearly defining the responsibilities and operating procedures for staff. Strengthen daily inspections and maintenance of equipment, promptly identifying and addressing potential hazards and malfunctions. For example, develop equipment inspection plans, regularly inspect transformers, switchgear, and other equipment, and record their operating status and parameters. Simultaneously, establish equipment maintenance files to record detailed information on equipment repair and maintenance.
Strengthen the training of power distribution room staff to improve their professional competence and skills. Familiarize them with the performance and operation of new equipment, and enable them to skillfully handle various emergencies. For example, regularly organize technical training and emergency drills for staff to improve their troubleshooting capabilities and emergency response speed. By improving the professional competence of staff, the safe and stable operation of the power distribution room can be ensured.
Maintain close communication and coordination with the power supply department to stay informed of changes in power policies and plans. During the capacity expansion and renovation process, seek support and guidance from the power supply department to ensure that the renovation plan meets power supply requirements. For example, when applying for capacity expansion, provide relevant documents and drawings as required by the power supply department and cooperate with them in conducting on-site surveys and reviews. Furthermore, after the renovation is completed, promptly apply to the power supply department for acceptance to ensure smooth power grid connection.
When upgrading or expanding power capacity, the interests and needs of surrounding businesses and residents must be fully considered. Consultation with them is essential to gain their understanding and support. For example, before construction begins, a construction notice should be issued to inform them of the construction time, scope, and potential impacts. During construction, effective noise reduction and dust control measures should be implemented to minimize the impact on the surrounding environment. Good communication and consultation with surrounding businesses and residents can avoid unnecessary disputes and conflicts, ensuring the smooth progress of the upgrade project.
Expanding power capacity in urban centers presents challenges due to limited space in substations, requiring a comprehensive consideration of various factors and the adoption of multiple solutions. This includes: conducting on-site surveys and demand assessments to accurately understand the current state of the substations and their power needs; selecting compact electrical equipment and optimizing equipment layout to improve space utilization; introducing advanced technologies and equipment to replace outdated equipment and enhance power system performance; expanding space and modifying civil engineering structures to create conditions for capacity expansion; strengthening management and maintenance to ensure the safe and stable operation of equipment; and collaborating with relevant departments and units to secure their support and cooperation. Only in this way can the goal of expanding power capacity be achieved within limited space, meeting the growing electricity demand of urban development and providing a reliable power guarantee for the city's sustainable development.
|
|